|
1998/1
No.59 |
1. 謹賀新年 | 2. 音の形と相 | 3. 高速移動体上の騒音発生源の同定 | 4. 携帯の美学 ポケット蓄音機 | 5. 積分型普通騒音計 NL-06 | 6. ISO NEWS |
ISO
NEWSISO(国際標準機構)は1950年代後半に設立され、現在迄各種の測定規格を制定して測定方法の統一に貢献してきました。最近日本においても、JIS規格をできるだけISOの規格と整合させる努力がされております。ISOにおける音響の分野はTC(Technical committee)/43で、これにはSC(Sub-committee)/1(騒音)とSC/2(建築音響)があり、このほかにTC43として音響一般（音響の単位と聴覚関係）を担当しています。ここではまず現在までにISO/TC 43 SC/1で審議されて、ISO(国際規格)として発行された騒音関係の規格の一覧を紹介いたします。規格の中で☆印のあるのは現在改訂作業がおこなわれていることを示しています。尚、これらの規格は日本規格協会から購入することができます。次回はTC 43で審設されたSC/1以外の規格と環境に関係ある振動の規格について、TC 108(振動)の一部、及びISOにおける審議の方法についても紹介する予定です。
(五十嵐寿一)
注:日本規格協会:〒107東京都港区赤坂4-1-24
Tel.03-3583-8003、Fax:03-3586-2029
ISO IS(International Standards)Acoustics
☆ISO 362:Measurement of noise emitted by
accelerating road vehicles-Engineering method.
First Edition-1981
ISO 362-1981/Amendent 1:1985
ISO 1680:Test code for the measurement of airborne
noise emitted by rotating electrical machinery
Part 1:Engineering method for free-field conditions over a reflecting plane
First Edition-1986
Part 2:Survey method
First Edition-1986
☆ISO 1996/1,2,3:Description and measurement of environmental
noise-
Part 1:Basic quantities and procedures.
First Edition-1982
Part 2:Acquisition of data pertinent to land use.
First Edition-1987
Part 3:Application to noise limits.
First Edition-1987
ISO 1999:Determination of occupational sound exposure and
estimation of noise induced hearing impairment.
First Edition-1975, Second Edition-1990
ISO 2151:Measurement of airboren noise emitted by compressor/primemover-unit
Intended for outdoor use(To be replaced by future ISO 3989 of TC 43)
First Edition-1972
ISO 2204: Guide to international standards on the measurement
of airborne acoustical noise and evaluation of its effect on human beings.
First Edition-1973, Second Edition-1979
☆ISO 2922:Measurement of noise emitted by vessels on inland
water-way and harbor
First Edition-1975
ISO 2923:Measurement of noise on board vessels
First Edition-1996,
Technical Corrigendum 1 Pub.1997
ISO 3095:Measurement of noise emitted by railbound vehicles.
First Edition-1975
ISO Tech.Rep.3352:Assessment of noise with respect to its
effect on the Intelligibility of speech.
First Edition-1974
☆ISO 3381:Measurement of noise inside railbound vehicles.
First Edition-1976
☆ISO 3740:Determination of sound power levels of noise sources-Guideline
for the use of basic standards and for the preparation of noise test codes.
First Edition-1980
☆ISO 3741:Precision methods for broad-band sources in reverberations
rooms.
First Edition-1975
ISO 3742:Precision methods for discrete-frequency and narrow-band
sources in reverberation room.
First Edition-1975
ISO 3743:Engineering methods for small, movable sources
in reverberant fields- Part1:Comparison method for hard-walled test rooms
Part2:Method for special reverberation test rooms.
First Edition-1994
ISO 3744:Engineering methods in anessentially free-field
over a reflecting plane.
First Edition-1981, Second Edition-1994
ISO 3745:Precision methods for anechoic and semi-anechoic
rooms.
First Edition-1977
☆ ISO 3746:Determination of sound power levels of noise
sources using sound pressure-
Survey method using an enveloping measurement surface over reflecting plane
First Edition-1979
ISO 3747:Suvey method using a reference sound source.
First Edition-1987
ISO 3748 (DIS):Engineering methods for small, omnidirectional
sources under conditions over reflecting plane.
Vote:1984-01-15
ISO 3822:Laboratory test on noise emission from appliances
and equipment used in water supply installations
Part1:Method of measurement
Second Edition-1983
Part2:Mounting and operating conditions for draw-off taps and mixing valves
Second Edition-1995
Part3:Mounting and operating conditions for in-line valves and appliances
First Edition-1984
Part4:Mounting and operating conditions for special appliances
First Edition-1985
☆ ISO 3891:Procedure for describing aircraft noise heard
on the ground.
First Edition-1987
ISO 4871:Noise labelling of machinery and equipment.
First Edition-1984
ISO 4871:Declaration and verification of noise emission
values of machinery and equipment.
Second Edition-1996
(The first edition was replaced by the second edition.)
ISO 4872:Measurement of airborne noise emitted by construction
equipment intended For outdoor use-Method for determining compliance with
noise limits
First Edition-1978
ISO 5128:Measurement of noise inside motor vehicles.
First Edition-1980
☆ ISO 5129:Measurement of noise inside aircraft.
First Edition-1981,Second Edition-1987
ISO 5130:Measurement of noise emitted by stationary road
vehicles-Survey method.
First Edition-1982
ISO 5131:Tractors and machinery for agriculture and forestry-Measurement
of noise at the operator's position-Survey Method.
First Edition-1982,Second Edition-1996
ISO 5135:Dtermination of sound power levels of noise from
air terminal device, high/low velocity/pressure assemblies, dampers and
valves by measurement in a reverberation room.
First Edition-1984
ISO 6081:Noise emitted by machinery and equipment-Guidelines
for the preparation of test codes of engineering grade requiring noise measurement
at the operator's or by stander's position
First Edition-1986
ISO 6190:Measurement of sound pressure levels of gas turbine
installations for evaluating environmental noise-Survey method.
First Edition-1988
ISO 6393:Measurement of airborne noise emitted by earth-moving
machinery-Method for determining compliance with limits for exterior noise-Stationary
test condition.
First Edition-1985
ISO 6394:Measurement of airborne noise emitted by earth-moving
machinery- Operator's position-Stationary test condition.
First Edition-1985
ISO 6395:Measurement of exterior noise emitted by earth-moving
machinery-Dynamic test conditions
First Edition-1988 Amendment 1996
ISO 9369:Measurement at the operator's position of noise
emitted by earth-moving machinery Dynamic test condition
First Edition-1992
ISO 6798:Reciprocating internal combusion engines-Measurement
of emitted airborne noise-Engineering method and survey method(TC 70)
First Edition-1992
ISO 6926:Determination of sound power levels of noise sources-Requirements
for the performance and calibration of reference sound source
First Edition-1995
ISO 7182:Measurement at the operator's position of airborne
noise emitted by chain Saws
First Edition-1984
ISO 7188:Measurement of noise emitted by passenger cars
under conditions Representative of urban driving.
First Edition-1985
ISO 7196:Frequency weighting characteristic for infra-sound
measurement
First Edition-1990
ISO 7216:Agricultural and forestry wheeled tractors and
self-propelled machines-Measurement of noise emitted when in motion
First Edition-1992
ISO 7574:Statisical method for determining and verifying
stated noise Emission values of machinery and equipment-
Part 1:General considerations and definitions.
Part 2:Method for stated values for individual machine.
Part 3:Simple (Transition)method for stated values for batches of machines.
Part 4:Method for stated values for batches of machines.
First Edition-1985
ISO 7779:Measurement of airborne noise emitted by computer
and business equipment.
First Edition-1988
ISO 7917:Measurement at the orerator's position of airborne
noise emitted by brush saws
First Edition-1987
ISO 7960:Airborne noise emitted by machine tools-Operating
conditions for wood-working machines
First Edition-1995
ISO 8297:Determination of sound power levels of multi-source
industrial plants for evaluation of sound pressure levels in the environment-Engineering
method
First Edition-1994
ISO 8579-1:Acceptance code for gears-
Part1:Determination of airborne power levels emitted by gear units(TC 60)
First Edition-1993
ISO 9207:Manually portable chain saws with internal combustion
engine- Determination of sound power levels-Engineering method (Grade 2)
First Edition-1995
ISO 9295:Measurement of high frequency noise emitted by
computer and business equipment
First Edition-1988
ISO 9296:Declared noise emission values of computer and
business equipment.
First Edition-1988
ISO 9612:Guideline for the measurement and assessment of
exposure to noise in a working environment
First Edition-1997
ISO 9613:Attenuation of Sound during propagation outdoors
Part 1:Calculation of the absorption of sound by the atmosphere
First Edition-1996
Part 2:Genral method of calculation
First Edition-1996
ISO 9614:Determination of sound power levels of noise sources
using sound intensity-
Part 1:Measurement at discrete points
First Edition-1993
Part 2:Measurement by scanning
First Edition-1996
ISO 9645:Measurement of noise emitted by two-wheeled mopeds
in motion-Engineering method
First Edition-1990
ISO 9902:Textile machinery acoustics-Determination of sound
pressure levels and sound power levels emitted by textile machines-Engineering
and survey method (TC 72)
First Edition-1993
ISO 10302:Method of the measurement of airborne noise emitted
by small air-moving devices
First Edition-1996
ISO 10494:Gas turbines and gas turbine sets-Measurement
of emitted airborne noise-Engineering/Survey method (TC 192)
First Edition-1994
ISO 10843:Method for the description and physical measurement
of single impulses or series of impulses
First Edition-1997
ISO 10844:Specification of test tracks for the purpose of
measuring noise emitted by road vehicles
First Edition-1994
ISO 10847:In-situ determination of insertion loss of outdoor
noise barriers of all types
First Edition-1997
ISO 11094:Test code for the measurement of airborne noise
emitted by power lawn movers, lawn tractors, lawn and garden tractors, professional
movers, and garden tractors with moving attachment
First Edition-1991
ISO 11200:Noise emitted by machinery and equipment-Guideline
for the use of basic standards for the determination of emission sound levels
at a works station and at other specified positions
First Edition-1995
ISO 11201:Noise emitted by machinery and equipment-Measurement
of emission sound pressure levels at work station and at other specified
positions-Engineering method in an essentially free field over a reflecting
plane.
First Edition-1995
ISO 11202:Noise emitted by machinery and equipment-Measurement
of emission sound pressure levels at a work station and at other specified
position-Survey method in situ
First Edition-1995
ISO 11203:Noise emitted by machinery and equipment-Determination
of emission sound pressure levels at a work station and at other specified
positions from the sound power levels
First Edition-1995
ISO 11204:Noise emitted by machinery and equipment-Determination
of emission sound pressure levels at a work station and at other specified
position-Method requiring environmental corrections
First Edition-1995
Technical Corrigendum 1 Published 1997
ISO 11546-1:Determination of sound insulation performances
of sound insulation performances of enclosures-
Part 1:Measurement under laboratory Conditions (for Declaration purposes)
First Edition-1995
ISO 11546-2:Determination of sound insulation performances
of enclosures-
Part 2:Measurement in situ (for acceptance and verification purposes)
First Edition-1995
ISO/TR 11688-1:Recommended practice for the design of low-noise
machinery and Equipment-
Part 1:Planning
First Edition-1995
ISO 11689:Procedure for the comparison of noise-emission
data for machinery and equipment
First Edition-1996
ISO 11690-1:Recommended practice for the desing of low-noise
workplaces containing machinery-
Part 1:Noise control strategies
First Edition-1996
ISO 11690-2:Recommended Practice for the design of low-noise
workplaces containing machinery-
Part 2:Sound propagation and noise prediction in workrooms.
First Edition-1996
ISO 11691:Measurement of insertion loss of ducted silencers
without flow- Laboratory survey method
First Edition-1995 08.15, Corrected and reprinted-1995 12.01
ISO 11819-1:Measurement of the influence of road surfaces
on traffic noise-
Part 1:Statistical pass-by method
First Edition-1997
ISO 11820:Measurement on silencers
First Edition-1996
ISO 11821:Measurement of the in situ sound attenuation of
a removable screen.
First Edition-1997
ISO 11975: Determination of sound insulation performance
of cabins-Laboratory and in situ measurements
First Edition-1996
ISO 12001:Noise emitted by machinery and equipment-Rules
for the drafting and presentation of a noise test code
First Edition-1996
ISO 13473-1:Characterization of pavement texture by use
of surface profiles
Part 1:Determination of mean profile depth
First Edition-1997